Hardware & Accessories

Tested Malleable Casting used with Tie Rod for Column Beams/Retaining Walls. Weight: 300g approx.

Tested Malleable Casting used with Tie Rod for Column/Beams/Retaining Walls. Weight: 600g approx.

Internal alignment expansion pin for scaffolding tubes.

200 mm long 3 mm thick Hollow Tube for vertical standards connection. Weight: 500g approx.

For wall form damping 5 mm HR Sheet used with proper Eye Bolts & Sq Washer 10 mm.

300/250/200 mm long Roll Thread with Nut. Weight: 1.75 kg approx.

L.C. Bright Bar cold-rolled tie rod. Weight: 1.5 kg / Mtr.

For interlocking of Wall form Panels.

Tested Malleable Casting Prop Nut with 14mm handles. Heavy & Light variants.

Used in doing plumb at wall panels where 0-0 nuts are fitted.

Used in combination with wing nut for tie rod clamping. Weight: 300g approx.

Brake Type 6" Fix Base Type For Mobile Scaffolding Tower (H-Frame / Cuplock). 150 mm Dia Polyurethane Wheels.

For 40 x 40 NB Tubes, 4 mm HR Coil With Boron Eye Bolt. Weight: 800g.

For 40x40 / 40x50 NB Tubes, 4 mm HR Coil with Boron Eye Bolt. Weight: 850/950g.

Dia 38 mm Hollow Pipe 4 mm thick with solid cast handle. Weight: 3.5 Kg Approx.

Dia 38 mm Hollow Pipe 4 mm thick U-Head Jack for timber beams. Weight: 3.5 Kg Approx.

Folding steel tripod stand used in H 20 & Telescopic Prop Formwork.

100x100x6 mm plate with Built in Wingnut.